LED Projector Fog Lights for BMW R1200GS LC et R1250GS LC

LED Projector Fog Lights for BMW R1200GS LC and R1250GS LC - fully assembled.

This light set is our newest top product and includes all of our perennial experience in the lamp set development.

There are only 2 cables (positive and negative) clamped to the battery! This lamp system is completely independent from the BMW CanBus system.

How this works?
An electronic record three measured values and uses them to detect whether the engine is running and the lights should be turned on. Measured are: voltage drop by the starter, start of the generator and the vibration of the engine. Thus, the lamps will turned on safely only in case the engine is started and the alternator charges. When the engine is turned off, the lamps are automatically switched off after a few seconds. The afterglow is used here as a coming- home function.

After the lamps are switched on, these now can be switched at any time by double-clicking a waterproof micro switch. Thus, by the double clicking an accidental switching is prevented. This mini micro switch is to attach individually thanks an adhesive pad and is almost invisible to assemble. Some examples for mounting this switch are shown in the photos.

Now we come to the next very important point - the pivoting of the headlights.
Most LED headlamps have the disadvantage only to illuminate about 120 degrees. This is extremely disadvantageous when driving at night or in the mountains! On country roads and forest passages it is more than useful to illuminate the side strips to detect animals at an early stage and see curves still far before cornering. In the mountains it also makes sense to see early what is in the bend or curve to safely react!

For this reason, the lamp holder in this light set can be pivoted with one simple move. A plastic slide washer ensures a secure fit and can easily be adjusted by threaded screw when needed.

For mounting free boreholes are used, therefore no drilling is required. No connections to the CanBus system but only battery voltage (positive and negative) are required.
The LED lights fit in well with the BMW design. The VA-holder is fully pre-assembled . On the mounting plate the LED lamps, ballasts, relays, MotoBozzo-Switch and automatic - ON / OFF etc. are preassembled.

The kit allows a solderless quick mounting and can be installed by almost anyone can in less than 30 minutes .
A reprogramming of the BMW control unit is not necessary!

NOT suitable for the Aventure

LED Fog Light:
Innovative and new projector LED fog lights with excellent light output. Latest lighting technology and a high-performance LED makes the fog lights to headlights that bear the name right. There are no unwanted scattering of light and a perfect light / dark boundary. The projection lens is made of hardened, spherical glass and thus cannot be destroyed by rock fall.

• Corrosion protection for 480h salt spray
• Lamp housing ALU
• Waterproof connector
• Compact design
• Hardened glass lens
• ECE and SAE approved
• Development and production according to TS 16949 standard

• Innovative lighting technology
• Innovative design
• Bright, white light for perfect illumination
• White light colour and thus a harmony with LED or Xenon headlamps
• Fog lights with perfect lighting, no unwanted scattering of light
• High life expectancy of the LED, which usually survives a car life
• No costs for changing the light bulb, as typical of halogen
• Very low power consumption of 13W for fog lamps (typical 35/55W halogen in )
• Voltage range 12V
• ECE and SAE approval
The LED fog lights each have a separate control unit .

Function: LED light set with MotoBozzo switch
After starting the engine, the auxiliary lights are switched on automatically.
The operating status is indicated by a green LED 5 mm, which is firmly mounted on the lamp plate .

In case it is requested that the lamps should be switched off first after starting, just detach the lilac wire and attach the green one instead.

There is nor a TÜV neither an ABE approval required. The fog lights are license-free and can be retrofitted like with cars.

After the installation you will see that you are much better seen in daylight and thus drive more securely.
You will have a much safer driving experience when driving at night.

Scope of delivery:
LED Complete Set (2 Lamps with each abt. 13 Watt ) with V2A-holder (outer parts black, plastic-coated)
Relay
MotoBozzo-Switch
Switch-on Clectronic
Micro Button
Cable Ties